The dialog "select disto and port – Leica Geosystems Leica DISTO - online program manual User Manual

Page 24

••••

Reference: The pages and dialogs of DISTO online

User's Guide to DISTO Online

The Dialog "Select DISTO and PORT"

Select DISTO

In this selection list all at present well-known DISTO are listed. If one is selected
this, then the fields Baud rate, data bit, parity and stop bit become automatically
pre-set to the factory setting's of the respective DISTO.

Present well-known DISTO types are

DISTO GSI

DISTO memo²/pro²

DISTO pro

Port

In this selection list all available serial interfaces of the computer are to be listed,
i.e. interfaces occupied by another program are not listed here.

Baud rate

Select here the Baud rate for communication with the Leica DISTO. Possible
Baud rates are from 110 to 56000 Baud.

Data bit

Select here the number of data bits for communication with the Leica DISTO.
Possible data bit settings are 7 or 8

Parity

Select here the communication parity bit Possible values are none, even or odd
parity

Stopbit

Select here the number of stop bits for communication with the Leica DISTO.
Possible values are 1, 1.5 and 2.