Transparent surfaces, Wet, smooth or high-gloss surfaces, Illumination – Leica Geosystems Leica DISTO Classic3 User Manual

Page 35: Wet, smooth or high-gloss surfaces 35, 35 transparent surfaces illumination

Text mode
Original mode

Transparent Surfaces

Illumination

Thanks to
fluorescence, you
can also see your
result in the dark. If
the display is placed
under a light source
(daylight, artificial

light), it will illuminate for more than 15
minutes! Without consuming any power!

Wet, Smooth or High-Gloss

Surfaces

For reasons of safety and optics, never
measure against a clear liquid (e.g. water) or
clean glass (not dusty).
For materials and liquids unfamiliar to you
always take a trial measurement.

1.If aiming at an angle, the laser beam is

reflected. The DISTO may receive a signal
that is too weak (error message E 255).

2.If aiming at a right angle, the DISTO may

receive a signal that is too strong (error
message E 256).