Measure with additional tolerance, Setting key 23 – Leica Geosystems Leica DISTO Classic3 User Manual

Page 23

Measure with additional tolerance

It is possible to determine dimensions with
additional tolerance e.g. by adding an offset
to the rear reference

Switch on.

Press once, briefly.

Press a second time and keep pressed

until

and

appear.

Press until

appears flashing on the

display.

Set required offset for the

reference.

The setting can be changed quickly by

holding down the

keys or the

key (fast setting).

Confirm setting.

To indicate that an offset has been set, the

symbol is displayed continuously.

Setting Key