Leica Geosystems Leica DISTO Classic3 - Manual (Page 30)

30
Continuous measurement
(Tracking) Minimum (Fnc 3)
Determine the
minimum dimension,
e.g. ceiling height,
without having to
precisely align to the
normal (both axes).
Switch on DISTO.
Place instrument in normal mode.
Press until and appear
on the display.
Confirm function.
Aim DISTO approximately at the
target point.
Move the DISTO a large amount
around the target point. The
instrument calculates the variations
and determines the smallest value.
The two surfaces (e.g. floor /
ceiling) must be approximately
parallel.
Stop continuous measurement.
The smallest distance
(e.g.
) is displayed.
Function Key
Target point