Dynon Avionics D1 - Manual (Page 25)

D1 Pilot’s User Guide 6-1
6. USING YOUR D1
Power On/Off
Turn the D1 on and off by holding the power button on the top of the device. The D1 will also
automatically power on any time a power is applied to the PWR port on the right side of the unit.
Charging the Battery
BATTERY INFORMATION
Only use chargers and power adapters specifically designed for the D1! Connecting other chargers WILL
CAUSE DAMAGE to the D1 that will not be repaired under warranty.
The D1 is powered by an internal Li-Ion battery that provides at least 4 hours of use from full
charge when not connected to an external power source. The amount of time that the battery will
operate the D1 from a full charge will vary with temperature, GPS visibility, use of the external
GPS antenna, and the brightness setting.
CHARGE USING THE AC POWER ADAPTER OR VEHICLE POWER ADAPTER
Only use chargers and power adapters specifically designed for the D1! Connecting other chargers WILL
CAUSE DAMAGE to the D1 that will not be repaired under warranty.
The Vehicle Power Adapter must not be modified – it converts aircraft voltage to 5V that the D1 can
use. Cutting off the Vehicle Power Adapter’s base to connect it directly to ships power WILL DESTROY
your D1.