C. Crane CWFR - Manual (Page 37)

CC WiFi Page 37
Help Pages — Ethernet Network Help
The LED Connection Light Does Not Flash When Cable is
Inserted into Radio:
1. Be sure that the power is connected to both the radio and the
router.
2. Your Ethernet cable may be damaged or incompatible. Use a
“Straight Through” Cat5 or Cat6 Ethernet Cable. You can purchase
Ethernet cables from C. Crane or your local electronics store.
Having Trouble Connecting to a Network using an Ethernet
Cable:
1. Be sure that your internet is working. Try accessing the internet
using a computer that is connected to the same router as the
radio. If you cannot access the internet on your computer, the
radio will not connect either. It may be necessary to call your
internet service provider for help repairing your internet
connection.
3. It may be necessary to configure your radio with a “static” IP
address if your router is not setup to use DHCP. To manually
configure the radio’s network settings, navigate on your radio to:
Configure > Wi-Fi and Network Setup > Edit Configuration.
Contact your network administrator to acquire the proper network
addresses.