beautypg.com

Radio operation – C. Crane CC2TER User Manual

Page 14

background image

Page 14 CCRadio2E

Radio Operation

The 2-Meter Ham Band is a popular radio band used by amateur radio

operators for civil defense. After a hurricane, earthquake or other

calamity, 90% of emergency coordination at the local level takes place

on this band. Listening to this band during an emergency can be

extremely valuable and even life saving. For most people, the

CCRadio2E will probably be their first experience with Ham radio.
We have preprogrammed some of the most popular frequencies into the

five memories of the CCRadio2E. Different frequencies may be active

at your location, other than those preprogrammed into the memories.

The following are the frequencies and memory locations as they were

originally preprogrammed:

1) 146.520

2) 146.760

3) 146.880

4) 146.940

5) 147.000

You can program your frequencies of interest into a memory location at

any time.
To scan the five memory channels when in 2-Meter Ham,

momentarily press both of the Up and Down Tuning Buttons

at once, the radio will scan the memories and automatically

stop when it detects a voice transmission. Raise the telescopic antenna

up fully in a vertical position. It is best to set the squelch level prior to

scanning the memory stations. See “Setting the Squelch” below.

SETTING THE SQUELCH

Background noise or static is present to some degree at every location

and on every frequency of the 2-Meter Ham Band. This is a normal con-

dition. If you set the squelch above the background noise level, the

radio will remain silent until a voice transmission is detected. It is best to

set the squelch as low as possible (to just before static is constant).

This way you can hear signals that may be weak. If you set the squelch

too high, you may miss some weak voice transmissions.
To adjust the squelch level, press and hold the main

Tuning Knob in for one second until the display changes.

Turn the Tuning Knob slowly clockwise from OFF

through 12 (increasing squelch) until the radio just becomes silent.

NOTE: Squelch operates on the 2-Meter Ham Band only

.

2-METER HAM (VHF) BAND (144 TO 148 MHZ)

This manual is related to the following products: