C. Crane SKWV - Manual (Page 15)

CC SKYWAVE Page 15
Hidden Settings
Disable Beep Sound
With the power OFF, press and hold
memory button #3 for two seconds.
All beeps are disabled except ALARM
and WX ALERT.
Repeat sequence to enable beep again.
Designate Frequency or Clock while
Listening to the Radio
With the power OFF, press and hold
memory button #4 for two seconds.
“C” will appear on the screen indicating
that the Clock will show while listening
to radio.
Repeat sequence to display Frequency
instead. “F” will appear on the screen to
indicate that the Frequency will show
when listening to the radio.
Audio Filter for Voice or Music
The CC Skywave has a special audio filter to enhance your listening preference. The “MUSIC”
setting will allow the full range of audio to be received so the music sounds best.
The “VOICE setting will narrow the audio range so the human voice is most prominent.
To set the audio filter, press buttons #1 and #2 at the same time while the
radio is powered on. The display screen will show “MUSIC” or “VOICE” indicating your
selection.
Reset All Settings
With the power OFF, press and hold memory buttons #4 and #6 for five
seconds. The radio will beep four times indicating that all settings have been restored
back to the factory defaults.