C. Crane SKWV - Manual (Page 11)

12 14 15 13 11
CC SKYWAVE Page 11
Radio Operation
WARNING! DO NOT ATTEMPT TO
CHARGE ALKALINE OR OTHER
NON-NiMH BATTERIES.
SEE PAGE 3 FOR MORE INFORMATION.
13. Alarm Button
With the radio powered off, press and
hold the ALARM button
for two seconds. While the hour is
flashing, press the or tuning
buttons (or rotate knob) until the hour
and AM/PM time is correct. Press the
ALARM button again to adjust the
minutes. When finished, press the
ALARM button again to confirm. To
disable alarm, press the ALARM button
for three seconds.
14. Activate 9 or 10 kHz Tuning Button – Expand FM Band
Many parts of the world, including Europe, use 9kHz tuning steps for the AM band.
10kHz tuning steps for AM are used in the USA and other regions. Switch tuning steps by
holding the 9/10kHz button for two seconds with the radio turned off. When tuning steps are
set to 9 kHz the FM Band will also be expanded to cover 76-108 MHz (Japanese FM Band.)
By default, the alarm will wake you with a “beep”. To wake to a radio station, press the
up-arrow tuning button during alarm setup. A speaker icon displays on the screen
indicating that the alarm will wake to the previous radio station played. It is best to check
the station frequency and adjust the volume level to your wake up preference before going
to sleep to insure that it is just how you want it. When the alarm sounds, press the power
button to turn the alarm off, or press any other button to sleep for 10 more minutes.