BendixKing KLX 135A - Quick Reference Guide - Manual (Page 3)

-3-
NAV 5 (Moving Map) Page Tips
To change the map scale factor:
1. Press the
B
button. The cursor comes up over the map scale in the
lower left corner of the map display.
2. Use the right inner knob to change between scale factors.
3. For terminal area operations select AUTO scale factor.
To change what information is displayed on the map:
1. Press the
B
button, select Menu? and press the
F
button to bring
up a pop-up menu.(Figure 3)
• Line 1: Display 5 nearest special use airspaces (SUAs), on or off
• Line 2: Display 9 nearest VORs; on or off
• Line 3: Display 9 nearest airports; on or off
• Line 4: Map orientation; N
↑
=North up, DTK
↑
=Desired track up, TK
↑
=
Actual track up (when groundspeed > 2 kts)
2. Use the right outer knob to select the desired item, and the right inner
knob to change the setting.
To change the navigation info displayed in the lower right corner:
1. Press the
B
button.
2. Use the right outer knob to move the cursor to the cyclic field in the lower
right corner.
3. Press
E
to change between the choices, which are:
• Groundspeed,
• Estimated Time En route (ETE) to the active waypoint (figure 6),
• Crosstrack correction, or
• Magnetic Desired Track (DTK).
118.00
136.97
{ >Leg
17.6nm
APT VOR NDB SUP ACT NAV FPL CAL SET OTH
SUA: off
VOR:off
APT:off
112°KJAX
"
KORL
OMN
%
%
% %ORL
GJ
>117kt
Figure 3
KLX 135A 5/16/03 2:48 PM Page 1