Warpia SWP120A RevB SteamHD Getting Started User Guide User Manual

Page 2

2. HARDWARE INSTALLATION:
After the software has been installed, insert PC Adapter into an available USB port.

3. ESTABLISHING INITIAL WIRELESS CONNECTION WITH

TV/MONITOR/PROJECTOR:

Plug the Receiver Base into an electrical outlet using the power cord provided.

Connect the Receiver Base to the TV/Monitor/Projector using an HDMI

or VGA cable with the appropriate sound cable when required.

(cables not included)

Open the UWB Connection Manager by double-clicking the UWB Connection

Manager icon located in the System tray/Notification Area of your Windows

desktop.

4. CONFIGURING VIDEO SETTINGS:

You can choose to set the StreamHD’s video output to either Extend mode or

Mirror mode. The default setting on most operating systems is Extend mode.
Extend mode extends your desktop space across multiple monitors.

Mirror mode duplicates the image on your computer screen on the external monitor

To configure the Video Settings in Windows

7, press the Windows key together with

the P key( + P), and then the following menu will appear:

For Mirror Mode, choose Duplicate, for Extend Mode choose Extend
For changing the setting in Windows

XP and Vista, refer to the Installation and

Troubleshooting guide located on the CD or at www.warpia.com/support

Move the cursor over the StreamHD

Device Icon and click on the Connect

Tab to establish a connection

After the wireless connection is

established,a yellow star will then appear

next to theStreamHD Device Icon, making

it thedefault device for future connections.

h S

ure t

(

ey( + P), and then the following menu will appear:

ur computer screen o