Sangean WR-3 (V1) - Manual (Page 9)

8
Volume control
Press VOLUME UP/Down or rotate the Control knob on the
radio. There are 40 levels of volume.
Presetting stations
There are 10 memory presets on each of the MW and
FM wavebands.
1. Press the On/Off button to switch on your radio.
2. Tune to the station you would like to preset (tune as
previously described).
3. Press MEMORY button . “MEM” will be shown on the display.
4. Press the required Preset button (1 to 10).
5. Press MEMORY button again and the preset will be stored,
and “MEM” will disappear from the display.
6. Repeat this procedure for the remaining presets.
7. Stations stored in preset memories may be overwritten.
Recalling a preset station
1. When the radio is on, select FM or MW (AM) by pressing the
RADIO button.
2. Press the required Preset button (1-10), your radio will tune to
the station stored in preset memory.
GB