Sangean WR-3 (V1) - Manual (Page 19)

18
Alarm setting
Your sound system has an alarm which can be set to wake you by
CD, USB, SD card, FM radio, MW radio.
1. Press the ALARM ON/OFF button , and the alarm time
will be shown on the display, and the alarm is on. To turn off the
alarm function, press the Alarm ON/OFF button again.
2. Press the ALARM SET button and the alarm information will
be shown.
3. Press the TIME SET UP/DOWN button to adjust the alarm time.
Or press and hold the TIME SET UP/DOWN button to run the
adjustment faster.
4. Press CD / FM / MW / SD / USB button to select the alarm
source.
a. In FM/MW mode: Press TUNE UP/DOWN button or key
1-10 to select the station. And adjust the volume.
b. In CD / SD / USB mode: Select the track and adjust
the volume.
* the volume is initially set as 30.
5. Press the ALARM SET button to complete the setting.
* When the set alarm source is not available, the alarm source
will be FM.
* The alarm sounds from mute to loud.
6. To stop the alarm sound, press OFF button.
7. To disable the alarm function, press ALARM ON/OFF button,
and the symbol “ ” will disappear from the display.
GB