beautypg.com

Sangean WFT-1D+ (V1) User Manual

Page 38

background image

37

Preset

Preset allows you to store the most frequent listened stations that

you can select those stations easily and quickly. You can preset up to

10 stations for each Internet Radio, FM and Digital Radio (DAB plus).

To store a preset:

1. Turn to the required band (Internet Radio, FM or Digital Radio

(DAB plus)) and station.

2. Press and hold the required preset button (1 to 10) on the remote

control until the display shows “Preset stored”. The station will be

stored in the chosen preset. Repeat this for the remaining presets

if needed.

There is another option for FM mode:

1. Press the Preset button and the LCD will show “Save to preset” list.

2. Rotate the Tuning knob to select which preset number you would like

to save, and press the Tuning knob to save the preset.

To recall a preset:

1. Enter the required band (Internet Radio, FM or Digital Radio

DAB plus)).

2. Press the required preset button (1 to 10) and your remote control

will then to the station stored in the preset memory. Or press the

STOP/PRESET button and use TUNING KNOB to select and recall

the preset.

Clock Operation

The radio must have the clock / date set to use the alarm functionality.

Clock/Date Setup

1. To setup the time go to > System settings > Time/Date >

Set Time/Date.

2. Use TUNE+/TUNE- or Turning knob to adjust the values and use

FORWARD/BACK to move back and forth between fields. Press the

Turning knob or the button to move back and forth between fields

or confirm.

Time Zone Setup

To setup the time go to > System settings > Time/Date >

Set timezone. Then select the time zone.

DST (Daylight Savings Time setup)

To setup the daylight saving time (1 hour ahead) go to >

System settings > Time/Date > Daylight savings. And then select

ON or OFF for the daylight savings.

Time/Date Auto Update

Auto update menu allows the user to select whether or not the

time/Date is to be synchronized with the Internet.

To setup the auto update go to > System settings > Time/Date >

Auto update and choose the source of the update.

This manual is related to the following products: