Sangean WFR-20 (R1) User Manual

Page 51

Language selection

This facility allows you to change the display language for the menus.

1. Use the Select control to switch on your radio and to access
the menus. If needed, use the Back option to access the main
Mode menu. Rotate the Select control until ‘Configure’ is
highlighted on the display then press the Select control to enter
the Configure menu.

2. Rotate the Select control until ‘Language’ is highlighted then press
the Select control to access the list of available languages (English,
French, Spanish, German, Danish, Italian, Dutch, Portuguese,
Finnish, Swedish and Norwegian).

3. Rotate the Select control to highlight the desired menu language.
Press the Select control confirm your choice and to restart the
radio using the chosen language.

Software version display

The software version display is provided for your reference only.

2. Press and release the Select control to enter the Configure menu.
Rotate the Select control until ‘Version’ is highlighted.

3. Press and release the Select control to show the current software
version on the display. Rotating the control will display additional
information. Use the Back option to exit.