Compaq SCSI - Manual (Page 28)

QuickSpecs
Compaq ProLiant ML330
Generation 2 (G2)
DA-10961 World Wide — Version 18 — June 27, 2002 28
Technical Specifications
Dimensions (HxWxD)
(with feet)
16.5 x 7.5 x 20.25 in/420 x 191 x 515 mm System Unit
Weight (approximate) 34 lb/15.42 kg
Input Requirements Range Line Voltage 100 to 120 VAC/180 to 264 VAC
(per power supply) Normal Line Voltage 115 to 230 VAC
Line Frequency 50 to 60 Hz
Rated Input Current < 6A RMS at 90VAC with
maximum load
BTU Rating 1,560 BTU
Two internal HD68 connectors SCSI Connectors
(SCSI Models only)
Note: Support for either two internal, two external, or a mix of internal/external is
available. This is achieved using an internal to external SCSI cable option
kit (PN 159547-B22) and SCSI knockout.
Rated Steady-State Power 300W Power Supply Output Power
Maximum Peak Power 400W
Temperature Range Operating 50° to 93°F/10° to 35°C
Shipping –40° to 150°F/–40° to 66°C
Operating 20% to 80% Relative Humidity
(non-condensing)
Non-operating 5% to 90%
Acoustic Noise Idle
(Fixed Disk Drives Spinning)
L
WAd
(BELS) 5.3
L
pAm
(dBA) 45
Operating
(Random Seeks to Fixed Disks)
L
WAd
(BELS) 5.3
L
pAm
(dBA) 45
Diskette Size 3.5 in 1.44-MB Diskette Drive
LED Indicators (front panel) Green
Read/Write Capacity per
Diskette (high/low density)
1.44 MB/720 KB
Drive Supported One
Drive Height One-third
Drive Rotation 300 rpm
Transfer Rate (high/low) 500/250 Kb/s
Bytes/Sector 512
Sectors/Track (high/low) 18/9
Tracks/Side (high/low) 80/80
Access Times Track-to-Track (high/low) 3/6 ms
Average (high/low) 169/94 ms
Settling Time 15 ms
Latency Average 100 ms
Cylinders (high/low) 80/80
Read/Write Heads Two