Sangean DCR-10 (R1) - Manual (Page 49)

48
GB
12. Rotate the Tuning control until the desired year is set.
Press and release the Select button to confirm the year to
complete the clock and date setting. The display will revert
to the display for the previous operating mode.
Setting the clock time using RDS CT
1. When tuning to a station transmitting RDS data, press and hold
the Tuning control.
2. Rotate the Tuning control until “TIME SET” appears on the display.
Press the Select button to enter the setting.
3. Rotate the Tuning control until “AUTO CLK” appears on the display.
Press the Select button to confirm the setting. The clock time of
the radio will set up automatically according to the RDS
data received.
2,3
1-3