Sangean DCR-10 (R1) User Manual

Page 42

Clock and Alarms

Alarms
Your DCR-10 radio has two alarms which can each be set to wake
you to DAB+, FM radio, SD card, iPod or buzzing alarm. The alarms
may be set while the unit is in standby mode or while playing.

1. Before setting an alarm ensure that the clock time is set.
Press and release the Alarm button. “ALARM 1” will show on
the display.

2. Rotate the Tuning control to select the required alarm, 1 or 2.
Press and release the Select button to cause “SETTING” to show
on the display.

3. Press and release the Select button to choose alarm setting.
“On/Off” will show on the lower line of the text display.

4. Rotate the Tuning control to choose whether to set the alarm
to ON or OFF.

5. Press and release the Select button. If the previous selection
was to switch on the alarm, then alarm time will show on the
lower line of the text display and the Alarm hour digits will flash.
If Off was selected, the unit will exit the alarm menu.

6. Rotate the Tuning control to choose the alarm hour and then
press and release the Select button to enter the hour setting.
The Alarm minute digits will then flash on the display.

2,4,

6-8,10

2,3,

5-10