Sangean DCR-10 (R1) User Manual

Page 37

iPod docking

Your DCR-10 has an iPod dock facility which allows you to play
digital audio files and soundtracks held on your iPod directly.

The DCR-10 uses the Universal Dock Connector developed for
use with iPods. Recent models of iPod are supplied with adaptors
inserts which ensure correct alignment of the iPod with the
electrical connector.

1. Ensure that the radio is in standby. Carefully remove the iPod
dock connector cover from the top of your radio.

2. Place the iPod docking adaptor into the iPod docking recess so
that it is securely seated.

3. Carefully place your iPod on the universal iPod dock connector
then press the Standby/Sleep button to switch on the radio.
To avoid possible damage to either device, not use your iPod
without the correct adaptor fitted in the dock connector.

4. To select the iPod mode press the Source button until “IPOD”
shows on the display. If it was previously playing, your iPod
will switch on and continue playing from where it was
previously stopped.

Note:
The DCR-10 radio is able to recharge your iPod’s internal battery.

Your iPod will use its backlight settings as configured. If these
need changing, use the iPod’s Settings menu.