Sangean RCR-2 (V1) - Manual (Page 15)

14
GB
4. Press alarm 1 or 2 button again to confirm alarm cancellation.
The symbol will stay on the display for around 2 seconds
and disappear.
Note:
You may also select days of the week which you wish to be or not to
be woken after pressing SET button while display is blinking days of
the week. Press 1-7 ( Sunday – Saturday ) of button 16 for selection.
Snooze
To interrupt the alarm signal ( radio or beep tone/HWS), press the
Snooze button 15. The alarm stops and begins again with interval of
5 minutes. The alarm will continue for an hour if not being interrupted.
Stop the alarm signal
To stop the alarm signal totally, press button 1 Power on/off.
Nap timer
With key 2, you can select the period for the short term alarm in
10 minutes steps from 10-120 minutes.
The Nap timer starts when you release the key. NAP will appear on
display. The alarm signal sounds after the period of time which you
have set.
If you wish to turn off the Nap timer before the time is up, simply
adjust the number of minutes by pressing NAP key to OFF and
release. NAP will disappear from display.
When Nap timer signal is on, turn off the timer signal by pressing
key 1 Power on/off.
You can also activate the snooze function as described above.