Sangean RCR-2 (V1) User Manual
Page 13
12
GB
Alarm with radio
If you like to be awoken by the radio station you are listening,
press Alarm system 1 or 2 for more than 2 seconds, the appliance
will store the radio alarm station, then follow procedures 1-7 to set
radio alarm.
1. Set the desired radio alarm volume.
2. Select alarm system 1 or 2 by pressing the alarm 1 or 2 button.
Display will blink selected alarm system symbol.
3. Press alarm SET button 13, display will blink both alarm hour and
alarm mode with a beep.
4. Press alarm Mode button 17 to select alarm radio mode until
display shows .
5. Press + or – to adjust required alarm hour then press SET button
again, display minute digits will blink. Press + or – button to adjust
required alarm minute.
6. Press week day selection 1-7 ( Sunday – Saturday ) to select
required alarm week day. Display will show the days of the week
on which you wish to be woken by the alarm.
7. Press alarm button 1 or 2 to confirm all the alarm set with a beep.
Display will show indicating radio alarm is set.
Note:
If the alarmed week day(s) or alarm mode is not selected,
display will blink all the week days or show for a few
seconds indicating the alarm is not set and disappear,
the alarm will not be activated.