Sangean DDR-63+ (R1) - Manual (Page 99)

GB
Information
Factory reset
If you wish to completely reset your radio to its initial state this may be performed by following
this procedure. By performing a factory reset, all user entered settings will be erased.
Access the menu for the current mode by pressing and holding the Menu button. Press the
Folder Up or Down buttons to highlight the 'Main menu' option, then press the Select button
to select.
Press the Folder Up or Down buttons until 'System settings' is highlighted and then press the
Select button.
Press the Folder Up or Down buttons until 'Factory Reset' is highlighted and then press the
Select button. Press the Folder Up or Down buttons and to highlight 'YES' to proceed. If you
do not wish to carry out a system reset, highlight 'NO' and then press the Select button. The
display will revert to the previous menu.
With 'YES' highlighted, press the Select button. A full reset will be performed and the radio will
restart as if first plugged in. The DAB stations list together with any preset stations will be
erased and your wireless network connection details will be lost. All configuration settings will
be restored to their defaults, the clock and alarms will be reset.
1.
2.
3.
4.
In case of malfunction for any reason, reset the product as described above to resume normal
operation. It may be necessary in some cases to disconnect the mains power, then reconnect
power after 10 seconds. In case of malfunction due to electrical fast transient (burst), reset the
product as above (reconnection of the power source may be required) to resume normal
operation.
98