Sangean DDR-63+ (R1) - Manual (Page 58)

Scan setting
When using the FM mode your radio can be set to either scan local stations or to scan all stations
including distant radio stations.
Press the Radio button as needed to select FM radio mode.
Press and hold the Menu button to enter the FM menu.
Press the Folder Up or Down buttons on the remote control(or Tuning Up or Down buttons on
the touch panel) until 'Scan setting' is highlighted and then press the Select button to enter the
scan adjustment mode. The current scan setting is indicated with an asterisk.
To set your radio so that only the stations with the strongest signals are found during scanning
press the Folder Up or Down buttons until 'YES' is highlighted. Press the Select button to confirm
the setting. (Normally this will restrict scanning to local transmissions.)
Alternatively, to set your radio so that all available stations are found during scanning (local and
distant transmissions) press the Folder Up or Down buttons until 'NO' is highlighted. Press the
Select button to confirm the setting.
Press and hold the Menu button to return to the normal FM mode display.
1.
2.
3.
4.
5.
57