Sangean DDR-31BT (V1) - Manual (Page 19)

8
GB
Setting the time and the date manually
The unit will automatically set its clock when tuned to a DAB radio station
or to an FM station which is broadcasting the time via RDS.
If the clock cannot be set using DAB or FM radio then you will need to
set the time and the date manually before the alarm function can be
used. The time and the date may be set while the unit is in StandBy
mode or while playing.
If it becomes necessary to set the time and the date manually, please
follow these steps:
. Press and release the On / StandBy button to switch on the radio.
. Select the required waveband by pressing the Band button.
3. Press and hold the Advanced button to enter the setting.
4. Press the Tuning Up or Down buttons until 'System' shown on the
display.
5. Press and release the Select button to enter the Time menu.
6. Press and release the Select button to enter the “Set /4 hour“ menu.
7. Press the Tuning Up or Down buttons to highlight your option.
8. Press and release the Select button to confirm your selection.
The /4 hour setting is stored in the radio.
9. Press the Tuning Up or Down buttons to highlight the option of “Set
Time/Date“.
0. Press and release the Select button to enter the “Set Time/Date“
menu.