Sangean WR-22 (V1) - Manual (Page 24)

23
GB
Snooze
. When the alarm sounds, press any button other than the Standby
button will silence the alarm for 5 minutes. “SNOOZE’ will appear
on the display.
2. To adjust the silence time for the snooze timer, press and hold
the Info/menu button to enter the menu setting.
3. Rotate the Tuning control rotary until “SNOOZE X” shown on the
display, then press the Tuning control rotary to enter the setting.
Rotate the Tuning control rotary to adjust the silence time. There
are 5, 0, 5 and 20 minutes for the snooze timer.
4. To cancel the snooze timer while the alarm is suspended, press
the Standby button.
Sleep timer
Sleep timer will automatically switch off the radio after a preset time
has elapsed.
. Press and continue to hold the Power On/ Off button, the display
will cycle through the available sleep time in the order of
60-45-30-5-20-90-60. Release the button when the required
sleep time shown in the display and the radio will play the last
station selected.
2. Cancel the sleep function, press the Power On/Off button, The
radio power will be off and the symbol will disappear from
the display.