Sangean WR-22 (V1) - Manual (Page 19)

8
Setting the clock time
Manual setting
. When radio power is off, press and hold Menu/ info button to
enter the menu setting.
2. Rotate the Tuning control rotary until ‘CLOCK SET’ shown on the
display. Press the Tuning control rotary to enter the setting.
3. The hour setting on the display will begin flashing. Rotate the
Tuning control rotary to select the desired hour, and press the
Tuning control rotary to confirm the setting. Then rotate the Tuning
control rotary to select the desired minute, and press the Tuning
control rotary to confirm the setting.
Radio Data System (RDS/ RBDS)
When you set the clock time using the RDS/ RBDS function, your
radio will synchronize its clock time whenever it tunes to a radio
station using RDS / RBDS with CT signals.
. When tuning to a station transmitting RDS / RBDS data, press
and hold the Info/menu button.
2. Rotate the Tuning control rotary until a clock symbol shown on
the display. Press the Tuning control rotary to enter the setting.