beautypg.com

Clock and alarms – Sangean WR-22 (V1) User Manual

Page 18

background image

7

GB

Clock and Alarms

Setting the time format

The clock display used in stand-by mode and on the playing mode
screens can be set to 2 or 24 hour format. The selected format is
then also used when setting the alarms.

. Press and hold the Info/menu button to enter the menu setting.

2. Rotate the Tuning control rotary until CLOCK XXH appears on
the display, then press the Tuning control rotary to enter the
setting and the setting of time format begins to flash.

3. Rotate the Tuning control rotary to select either 2 or 24 hour format.

Press the Tuning control rotary to confirm your choice of clock
format. The display will then revert to the previous menu.

If the 2 hour clock format is chosen, the radio will then use the 2
hour clock for the setting of alarms with a PM indicator.

Setting the date format

. Press and hold the Info/menu button to access the menu setting.

2. Rotate the Tuning control rotary until a series digit for month/date/day
shown on the display. Press the Tuning control rotary to enter
the date format setting and the digit for month and date will flash.

3. Rotate the Tuning control rotary to select the required date format.
Press the Tuning control rotary to confirm your choice of date
format. The display will then revert to the previous menu.

This manual is related to the following products: