Sangean RCR-10 (R3) - Manual (Page 27)

GB
Manual setting
When choosing manual setting as the clock time setting of your radio,
the radio-controlled clock and Radio Data System (RDS) function will
both be disabled.
1. Press and hold the Info/menu button.
2. Rotate the Tuning control until a clock symbol appears on the left side
display, then press and release the Tuning control to enter the setting.
Rotate the Tuning control until MANUAL appears on the display, then
press and release the Tuning control to select the setting.
3. Rotate the Tuning control until CLOCK appears on the display.
Press and release the Tuning control to enter the setting.
4. The hour setting on the display will begin flashing. Rotate the Tuning
control to select the desired hour, and press and release the Tuning
control to confirm the setting. Then rotate the Tuning control to select
the desired minute, and press and release the Tuning control to confirm
the setting.
5. Rotate the Tuning control until DATE appears on the display.
Press and release the Tuning control to enter the setting.
6. Rotate the Tuning control to select the desired year, and press and
release the Tuning control to confirm the setting. Then rotate the
Tuning control to select the desired month, and press and release the
Tuning control to confirm the setting. Then rotate the Tuning control
to select the desired date. Press and release the Tuning control to
confirm the setting and the radio will beep once.
3,7
2