Sangean H203D (V1) - Manual (Page 8)

7
GB
Manually setting the clock
. Press and hold the Info/Menu button.
. Press the Tuning up/down button until ‘System’ shown on the
display, then press the Select button to enter the setting.
. Press the Tuning up/down button until ‘Time’ shown on the
display, then press the Select button to enter the setting.
4. Press the Tuning up/down button until ‘Set Time/Date’ shown
on the display. Press the Select button to enter the setting. The
digit will flash.
5. Press the Tuning up/down until the correct hour is shown on the
display. Press the Select button to enter the selection. The minute
digit will start flashing.
6. Press the Tuning up/down until the correct minute is shown on
the display. Press the Select button to enter the selection. The
day digit will then flash.
7. Then you will be asked to adjust month and year using the steps
previously described. ‘Time Saved’ will show on the display when
the clock setting is completed.