Dynamic range control settings - dab – Sangean H203D (V1) User Manual

Page 14

Text mode
Original mode

Dynamic Range Control settings - DAB

Dynamic Range Control (also known as DRC) can make quieter
sounds easier to hear when your radio is used in a noisy
environment.

. Press the Power button to switch on your radio.

. Press and hold the Info/Menu button.

. Press the Tuning Up/Down buttons until the display shows “DRC
value”.

4. Press the Select button to enter the setting.

5. Press the Tuning Up/Down buttons to select the required DRC
setting (the default is 0).
DRC 0 - DRC is switched off, Broadcast DRC will be ignored.
DRC - DRC is set as sent by broadcaster.
DRC / - DRC level is set to / that sent by broadcaster.

6. Press the Select button to confirm the setting. The display will
return to normal tuning mode.

Note:

Not all DAB broadcasts are able to use the DRC function. If the
broadcast does not support DRC, then the DRC setting in the radio
will have no effect.