Sangean DPR-16 (R1) - Manual (Page 31)

30
GB
When the alarm sounds
The buzzer or radio alarm will sound at the selected times with
selected duration unless cancelled.
The volume used for the alarm will be as specified during the alarm
setting procedure. If the radio cannot connect to the specified radio
station, the buzzer alarm will be used instead.
To cancel an alarm, press the Standby button to return to standby
mode.
The alarm icon will flash at the bottom of the playing mode displays,
and the radio will automatically switch back to standby mode when
the specified duration has elapsed.
Disabling alarms
. To disable a single alarm enter the alarm setup menu and press
the Alarm button until the desired alarm is highlighted on the
display. Press the Tuning Control Rotary to enter the setting.
2. Rotate the Tuning Control Rotary until the 'Off:' option is highlighted
on the display. Press the Tuning Control Rotary to confirm. Now
the chosen alarm is disabled.
Note:
You can disable and activate the alarms when the radio is in
standby mode by pressing the Alarm button to enter the setting and
using the Tuning Control Rotary to select and confirm your desired
option.