Sangean DPR-16 (R1) - Manual (Page 16)

5
Selecting a DAB radio station
. When playing a DAB radio station, the display normally shows
the name of the current station with other related information.
2. Rotate the Tuning Control Rotary to access the radio station list
and to scroll through the available stations.
3. Press the Tuning Control Rotary to select the highlighted station.
The display may show 'Connecting...' while the radio re-tunes.
4. Use the Volume buttons to set the sound level or press the Mute
button to mute the sound as needed.
Note:
If the display shows 'Station Not Available' it may be necessary
to relocate your radio to a position giving better reception. A
question-mark in front of the station name merely indicates that the
station has not recently been detected by the radio. It may still be
available.
Secondary services
Certain radio stations have one or more secondary services
associated with them. Typically these are not broadcast continually.
If a station has a secondary service associated with it, the display
will show “>>” next to the station name on the station list. The
secondary service will then appear immediately after the primary
service as you press the Tuning Control Rotary.
. To listen to a secondary service, rotate the Tuning Control Rotary
to scroll to the chosen station, and press the Tuning Control Rotary
to tune to the station. If the secondary service is not available
(off-air) then the primary service will be selected.