Sangean DPR-16 (R1) User Manual
Page 11
0
GB
Setting the clock format
The clock display used in standby mode and on the playing mode
screens can be set to 2 or 24 hour format. The selected format is
then also used when setting the alarms.
. With your radio switched on, press and hold the Menu button to
access the menu for the current mode.
2. Rotate the Tuning Control Rotary until 'System' is highlighted on
the display. Press the Tuning Control Rotary to enter the system
settings menu.
3. Rotate the Tuning Control Rotary until 'Time' is highlighted on the
display. Press the Tuning Control Rotary to enter the time setup.
4. Rotate the Tuning Control Rotary until 'Set 2/24 hour' is highlighted
on the display. Press the Tuning Control Rotary to enter the clock
format menu. The current clock display format is marked with an
asterisk.
5. Rotate the Tuning Control Rotary to select either 2 or 24 hour
format. Press the Tuning Control Rotary to confirm your choice
of clock format.
The display will then revert to the previous menu. If the 2 hour
clock format is chosen, the radio will then use the 2 hour clock for
the setting of alarms, and will display a 2 hour clock with an AM or
PM indicator.