FaxBack NET SatisFAXtion 8.6 - AudioCodes MediaPack Hardware Installation Guide - Manual (Page 4)

NET SatisFAXtion 8 .6 AudioCodes MediaPack Hardware Installation Guide — Page 4
When the MediaPack boots up, Setup will detect it on the network and assign an IP address to it . Setup will display an Ok
status when the IP address has been successfully applied .
Click OK .
Now Setup will apply an initial configuration to the MediaPack . It will also upgrade the firmware, if needed . You may
optionally assign a descriptive name to this MediaPack, if there are multiple AudioCodes devices on your network .