Pigtronix DAngelico - Manual (Page 2)

increase the available clean boost up to 12db. This circuit is perfect for a
transparent signal level boost. We have chosen an overall maximum of 12db in
order to allow fine tune control of exactly how much level boost you want
throughout the entire range of the knob.
Effects Loop (Send / Return)
The SEND and RETURN jacks will allow you to patch any other effect(s) in
between the Compressor and Booster sections of this device. Simply connect
the SEND jack to the input of the effect you are looking to insert and connect
the output of the effect to the RETURN jack.
XLR DI output
The XLR output is wired in parallel with the main output to provide a DI signal
for front of house mixing. Like the master output, the DI signal will contain the
combination of Compressor, FX Loop and Boost sections you have activated.
Power
The 18VDC power supply that is included provides a huge amount of headroom
and output level. The D’Angelico pedal does not take batteries.