beautypg.com

Features – Hexin Technology HXVB-300R Active PoE UTP Data + Video Balun Receiver User Manual

Page 2

background image

PoE Power/Video/Data UTP Transceiver User Manual

Summary

The unit is a device that allows the transmission of real-time video and power over Unshielded Twisted Pair cable. PoE PVD transmitter

convert unbalanced video signal to balanced (same range but opposite polarized) difference signal transmitting via the UTP cable, have good

common interferences rejection, under strong interference environment can transmit color video in high quality.

Power over Ethernet (PoE) technology describes a system to transmit electrical power, along with data, to remote devices over standard

unshielded twisted-pair (UTP) cable. In applications such as security surveillance, video conferencing, elevator surveillance the PoE PVD

transceiver use one UTP cable to replace power, video coaxial and data cables. Working hours much lessened and 70% cable cost saved.

Features

¤ Longer transmission distance, high video signal quality
Use advanced video signal technology, better equalize video signal differs attenuation in UTP cable, Keep original video signal real-time,

brightness, sharpness and colorful, and enable longer and better signal transmission.
¤ Standard and easy routing UTP, low cable and installation cost
PoE PVD transceiver use cat5 or higher cat UTP, according TIA/EIA 568A or 568B standards, can use of already installed UTP cable in

building. Transmit Power/Video/Data or Audio in a UTP cable (4 pair) for camera. Avoid the need for separate data and power cable

infrastructure and costly AC outlets, no electrician is needed, and much working hours saved.
¤ Perfect power manager for centralized power supply
Multiple power protection and working status indication, in control room diagnose remote PVD transmitter or camera fault, use together

with UPS device can continue operate even when power failure.
¤ Better surge suppression; Exceptional interference rejection

Built-in multiple surge suppression device, and have ground lifting. When surge voltage put on signal wire, the most will be induced and

released to earth ground track power ground line, left can be work out pass multiple surge suppression device.