Set-up guide, Assembly of the wing, Ride height adjustment – OFNA Racing 9.5 MBX RTR User Manual

Page 31: For a stick pack battery

Assembly of the right and left hand side
are the same.

15073
Orange
Wheel Nut

ASSEMBLY OF THE WHEELS ONTO
FRONT KNUCKLE ARM AND REAR HUB

25mm

ASSEMBLY OF THE WING

* Drill two 7mm holes
for mounting.

3x12mm
Screw

40027
Countersunk
Plastic Washer

OPTION:
40027 - CNC Alum
Countersunk
Wing Washer, Orange

*Upper Deck Of
The Wing.

40084
Wing, Yellow

40083 - Wing White
40084 - Wing Yellow
40085 - Wing Red
40086 - Wing Lime
40087 - Wing White

86044 - Red
86045 - White
86046 - Lime
86047 - Yellow
86048 - Black
86049 - Chrome
17mm Dual Spoke,
2 pairs (8 wheels) per Bag.

* Check the hole spacing on the underside.

OPTION:
49042
CNC Alum. Wing Washer
Orange, 2 pcs.

Soft

Firm

Soft

Firm

SET-UP GUIDE

RIDE HEIGHT ADJUSTMENT

2mm
Hex Screw

Use a 2mm hex screw to adjust the ride height.
Screwing in the 4x10mm set screw....Ride height becomes lower.
Uncsrewing the 4x10mm set screw..Ride height becomes higher.

1 2 3

1 2

3x12mm
Screw

FOR A STICK PACK BATTERY

40048
Stick Pack
Battery Holder
(5 Cell)

10211
Stick Pack
Battery(5 Cell)
( Not Included.)

* Use tape to secure the battery.

* Insert battery wire into
receiver box and connect to
the switch.

Tape

40048
Battery Holder
Mount