Assembly of the tires and wheels – OFNA Racing 9.5 MBX RTR User Manual

Page 29

2. Pull down piston, attach pressure top
and shock oil overflow with tissue
paper.

SHOCK ASSEMBLY

FILLING THE SHOCKS WITH OIL

ASSEMBLY OF THE SPRING

1. Pull down piston and pour oil into
shock cylinder. Remove air bubbles
by slowly moving piston up and down.

3. Tighten up shock cap.

*Move Slowly.

*Leave 3mm.

OIL

Oil Seal

32237
7mm R-Ring

* Push 6mm ball joint
into ball end.

2.6 x 5mm
Washer

40069
Black
Shock Spring

40063
Spring Holder

OPTION:
40063 - CNC Alum Spring Holder, Orange

30411
6mm Ball

32033
Pressure Top

40093
Shock Cap
Hard Coated

Fit into the groove.

* Assembly 2 pieces of the
shock shaft for front and
rear.

40054
Short Shaft

40055
Short Shaft

* Long shaft
for rear.

down.

* Be careful not to damage shock shaft.

* Short shaft
for front.

Make a PAIR for rear

4. Assembly the dust cover.

* Cut 6mm for front.

40060
2.5mm
Nylon Nut

32235
Shock
Piston

40076
Shock
Cylinder

40077
Shock
Cylinder

32237
1mm
Washer

32237
2mm
Washer

Make a PAIR for front

Fit the O-ring into groove.

49041
Spring
Adjuster,
Orange

J-47C
Spring Adjuster....4

40059
14.7mm
O-Ring

32237
3.5mm
O-Ring

40058
Shock Shaft
Dust Cover

32235
Shock Piston.........4

40059
14.7mm O-Ring....4

32237
1mm Washer.............4

32237
2mm Washer..........4

40060
2.5mm Nylon Nut........4

40056
Shock Plastic
Rod End

40052 - Front Shock Set
40053 - Rear Shock Set

OPTION:
40069 - Black, Stock, Spring Set
40070 - Green, Soft Set
40071 - Blue, Med. Set
40072 - White, Hard Set

APPLY OIL TO SHOCK BODY
BEFORE INSTALLING COLLAR

3 x 20mm
Cap Screw

35313
3mm
Nylon Nut

Plastic
Bushing

36610
Shock Upper Fixing

36610
Shock Support.....2

3x25mm
Cap Screw

3 x 20mm
Cap Screw

3mm
Nylon Nut

Plastic
Bushing

3x25mm
Cap Screw

ASSEMBLY OF THE FRONT SHOCK ABSORBER

ASSEMBLY OF THE REAR SHOCK ABSORBER

Assembly of the right and left hand side
are the same.

M3
Nylon Nut..........2

3 x 20mm
Cap Screw..........2

3 X 25mm
Cap Screw..........2

* Take the plastic bushing
from the shock plastic
parts tree.

ASSEMBLY OF THE TIRES AND WHEELS

INSTANT
GLUE

* Apply instant glue into
the groove of the wheel.

86062
X Equal Pin
Tire

81095
Inner Sponge

86035
wheel