Assembly of the front shock tower, Assembly of the front pivot ball knuckle arm, Assembly of the front knuckle arm into front arms – OFNA Racing 9.5 MBX RTR User Manual

Page 11: Assembly of the front suspension arms

40067
M3x12
TP Screw

40067
M4x15
TP Screw

35314
4mm
Nylon Nut

ASSEMBLY OF THE FRONT SHOCK TOWER

OPT: 49003
CNC 7075 Alum. Shock Tower

49037
Front
Shock Tower, Orange

ASSEMBLY OF THE FRONT PIVOT
BALL KNUCKLE ARM

36901
Ball Type
Knuckle Arms
( Right and Left Side)

* Note the "R" mark
is for righthand side.

* Adjust alum. nut to
keep steering ball
smooth.

Assembly of the right and left hand side
are the same.

* Use 5mm
hex wrench.

36904
14mm
Alum. Nut

36905
Steering Ball
Washer

36903
14mm
Steering Ball

36052
CVD
Universal Joint

36053
8x16mm
Ball Bearing

ASSEMBLY OF THE FRONT KNUCKLE ARM
INTO FRONT ARMS

4X10mm
set screw

36870
4x4mm
Set Screw

* A 4x10mm set screw is used
to adjust the ride-height.

* Use a 2.5mm
hex wrench.

40245

Orange
Wheel Hub
( Alum.)

36055
2.5x17mm
Pin

3mm

3.5mm

40202
Front Lower
MBX Arm

40094
Front Upper
MBX Arm

ASSEMBLY OF THE FRONT SUSPENSION ARMS

40023
Lower Arm Shaft (4mm)

90021
3mm
E-Ring

90020
2.5mm
E-Ring

36170
3mm
Arm Shaft

* Insert the drive shaft into the
cap joint before assembly.

Assembly of the right and left hand side
are the same.