Axesstel AXW-D1900 - Manual (Page 12)

CDMA 1xEV-DO Wireless Broadband Modem
AXW-D800 / AXW-D1900
- 12 - Connecting the World Now
1. Click on the “Network” tab.
2. Under “Local Area Network Setup”, Select “DHCP Server->Enable” to
enable Dynamic IP assignments.
3. Under “PPP Configuration”, enter login User ID and Password of the
account. Choose type of Authentication process used by the network.
Enter access dial number of login account.
4. Press “APPLY” button.
5. Turn off and turn on the terminal.
6. Log in and check if the information you have entered are correctly
shown. Password is shown with black dotsfor security purpose. If the
User ID is not changed, repeat the steps 3, and 5..
DHCP stands for Dynamic Host Configuration Protocol. Axesstel Wireless
1x-EV-DO Modem has a built-in DHCP server. The DHCP server will
automatically assign an IP address to the computers on the LAN. Be sure
to set each client PC’s TCP/IP settings to “obtain an IP address
automatically”.