Axesstel TX240G - Manual (Page 14)

14
POWER ON / OFF
The power switch is located on the back side of the terminal
1. Turn on the unit by moving switch to ON position.
2. Turn off the unit by moving switch to OFF position.
NOTE: When you turn on the terminal, it automatically searches for cellular service.
After successfully acquiring cellular service, the Signal LED turns to Green, Orange or Red
depending on signal strength.
MAKING CALLS
1. Check if the terminal is turned on.
2. Pick up the handset of the phone.
3. If you hear a dial tone, dial the desired telephone number by using the wired or cordless
telephone’s keypad.
NOTE: You can dial a phone number with a maximum of 32 digits, including
□
* and
□
# .
4. Wait for about 3 seconds until the call is automatically processed by the terminal. (Auto Dial Time
can be configured from 3 seconds to 9 seconds, or turned-off).
NOTE: If “
□
# as Send Key” feature is enabled, press the
□
# button to process the call
immediately after entering the dialed number. Default setting is OFF. Please refer to the
page 19 for “Using
□
# as Send Key”.
5. When the other recipient answers, begin conversation.
NOTE: If Connection Alert is turned on, a beep is heard when the call is connected. The default
setting is OFF.
6. To hang up, put the phone receiver back on the phone hook or press the TALK or OFF button on
your phone.