Pro-Link Lithofin Stain-Stop Plus 120071 - Manual (Page 4)

Material Safety Data Sheet
Printed: 25.01.2007
Revised: 25.01.2007
Lithofin Stainstop PLUS
4
Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of
quality and varies from manufacturer to manufacturer.
Penetration time of glove material
The exact break trough time has to be found out by the manufacturer of the protective gloves and has
to be observed.
Eye protection: Chemical safety goggles
Body protection: Protective work clothing.
—————————————————————————————————————————————
9 Physical and chemical properties:
General Information
Form:
Liquid
Color: Colorless, Clear
Odor: Aromatic
Value/Range Unit Method
Change in condition
Melting point/Melting range:
undetermined
Boiling point/Boiling range: > 130 ° C
Flash point:
32 ° C
Auto igniting:
Product is not self igniting.
Danger of explosion:
Product is not explosive. However, formation of explosive
air/vapour mixtures is possible.
Explosion limits:
Lower:
~ 0.6 Vol %
Upper: ~ 8.0 Vol %
Density:
at 20°C ~ 0.8 g/cm³
Solubility in / Miscibility with
Water:
Insoluble
Viscosity:
dynamic:
at 20°C < 30 s ISO 2431/3mm
—————————————————————————————————————————————
10 Stability and reactivity
Thermal decomposition / conditions to be avoided:
No decomposition if used and stored according to specifications.
Dangerous reactions No dangerous reactions known
Dangerous products of decomposition:
In the case of fire or at high temperatures the formation of the following decomposition products is
possible: Carbon monoxide and carbon dioxide
—————————————————————————————————————————————
11 Toxicological information
Acute toxicity:
LD/LC50 values that are relevant for classification:
No toxicity data are available for the product itself.
Primary irritant effect:
on the skin: Repeated contact has a drying effect on the skin.
on the eye: Irritating effect.
Sensitization: No sensitizing effects known.