beautypg.com

Lithofin mn stain-stop, 9 physical and chemical properties, 10 stability and reactivity – Pro-Link Lithofin MN Stain-Stop 120043 User Manual

Page 4

background image

Material Safety Data Sheet

Printed: 08.11.2004

Revised: 03.11.2004

Lithofin MN Stain-Stop

4

In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer
exposure use respiratory protective device that is independent of circulating air.
Short term filter device:
Filter A
NIOSH/MSHA-approved respirator
Protection of hands:
Wear chemically resistant protective gloves (tested according to DIN EN 374)
The glove material has to be impermeable and resistant to the product/ the substance/ the
preparation.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the
degradation
After use of gloves apply skin-cleaning agents and skin cosmetics.
Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of
quality and varies from manufacturer to manufacturer.
Penetration time of glove material
The exact break trough time has to be found out by the manufacturer of the protective gloves and has
to be observed.
Eye protection: Chemical safety goggles
Body protection: Protective work clothing.

—————————————————————————————————————————————

9 Physical and chemical properties:


General Information

Form: Liquid
Color: Colorless, clear
Odor: Aromatic

Value/Range Unit Method

Change in condition
Melting point/Melting range:

undetermined

Boiling point/Boiling range: > 110 ° C

Flash point:

> 23 ° C


Auto igniting:

Product is not selfigniting.


Danger of explosion:

Product is not explosive. However, formation of explosive
air/vapour mixtures are possible.


Explosion limits:
Lower:

~ 0.6 Vol %

Upper:

~ 12.0 Vol %


Density:

at 20° C ~ 0.8 g/cm³


Solubility in / Miscibility with Water: Insoluble

Viscosity:
dynamic:

at 20° C < 30 s


Additional information:

VOC-Content: 741,2

—————————————————————————————————————————————

10 Stability and reactivity


Thermal decomposition / conditions to be avoided:
No decomposition if used and stored according to specifications.
Dangerous reactions No dangerous reactions known