Pro-Link Lithofin Cement-Away 120003 - Manual (Page 4)

Material Safety Data Sheet
Printed: 08.11.2004
Revised: 21.10.2004
Lithofin CEMENT-AWAY
4
Protection of hands:
Acid resistant gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the
preparation.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the
degradation
After use of gloves apply skin-cleaning agents and skin cosmetics.
Material of gloves
Polychloropren rubber (CR)
Butyl rubber, BR
Fluorocarbon rubber (FKM)
The selection of the suitable gloves does not only depend on the material, but also on further marks of
quality and varies from manufacturer to manufacturer.
Penetration time of glove material
The exact break trough time has to be found out by the manufacturer of the protective gloves and has
to be observed.
Eye protection:
Tightly sealed goggles.
If splashing of the product is possible wear full face protection as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133
Body protection: Acid resistant protective clothing
—————————————————————————————————————————————
9 Physical and chemical properties:
General Information
Form: Liquid
Color: Yellowish
Odor: Pungent
Value/Range Unit Method
Change in condition
Melting point/Melting range:
undetermined
Boiling point/Boiling range: > 90 ° C
Flash point:
Not applicable
Auto igniting:
Product is not selfigniting.
Danger of explosion:
Product does not present an explosion hazard.
Density:
at 20° C ~ 1.1 g/cm³
Solubility in / Miscibility with Water: Miscible
pH-value:
at 20° C < 2 in delivery state
—————————————————————————————————————————————
10 Stability and reactivity
Thermal decomposition / conditions to be avoided:
No decomposition if used and stored according to specifications.
Dangerous reactions Reacts with metals forming hydrogen
Dangerous products of decomposition: Hydrogen chloride (HCl)
—————————————————————————————————————————————