Pro-Link 205X 5-XTRA Marble Polishing Powder 100051 - Manual (Page 3)

MATERIAL SAFETY DATA SHEET
205X 5-XTRA Marble Polishing Powder
MSDS #1018 11/26/03 Page 3 of 5
Section 7: HANDLING AND STORAGE
Handling: Use dust-tight containers. Prevent accumulations of dust. Prevent release of
mists or dusts into workplace air. Label containers. Keep containers closed when not in
use. Empty containers may contain residues which are hazardous.
Storage: Store in a cool, dry, well-ventilated area, out of direct sunlight. Separate from
oxidizing materials, strong bases, and alkali metals.
Section 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
Engineering Controls: Use general or local exhaust ventilation to keep dust below
exposure limits.
Respiratory Protection: Not necessary for normal use.
Skin Protection: Wear chemical-resistant gloves and clothing to prevent skin contact.
Eye/face Protection: Wear chemical splash goggles and/or a full face shield.
General Hygiene Considerations: Do not eat drink, or smoke during work. Wash hands
frequently, before breaks, and after use.
EXPOSURE GUIDELINES
OSHA PEL: Not Established
ACGIH TLV: Not Established
NIOSH REL: Not Established
Section 9: PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Yellowish crystals
Odor: None
pH: 2.7 (0.1 M solution)
Vapor Pressure: Not applicable
Vapor Density (air = 1): Not applicable
Boiling Point: Not applicable (does not form vapor)
Melting Point: Decomposes when heated
Solubility in Water: Moderately soluble (2.5 g/100 mL)
Specific Gravity (water = 1): 2.0
Section 10: STABILITY AND REACTIVITY
Stability: Stable at normal temperature and pressure.
Incompatibility Hazards: Avoid bases, alkali metals, and strong oxidizing materials.
Hazardous Decomposition Products: No information available.
Hazardous Polymerization: Will not occur