Pro-Link Optimum Foaming Antimicrobial Soap MH220 EN - Manual

Date: 28 December 2010
Supercedes: 23 June 2006
MATERIAL SAFETY DATA SHEET
1.
PRODUCT IDENTIFICATION AND COMPANY IDENTIFICATION:
Product Name: FOAMING ANTIMICROBIAL SOAP #MH250, #MH220, #PM102
Company Name & Address:
PRO-LINK, INC.
500 CHAPMAN STREET
CANTON, MA 02021
Emergency Phone: 866-303-6948
Non-Emergency Phone: 781-828-9550
MSDS Request Phone: 781-828-9550
2.
INFORMATION ON INGREDIENTS:
HAZARDOUS INGREDIENTS CAS NUMBER OSHA PEL ACGIH TLV % RANGE
Ethyl Alcohol 64-17-5 1000 ppm 1000 ppm <5
Isopropanol 67-63-0 400 ppm 200 ppm <0.5
Other ingredient(s) with notification requirements: CAS NUMBER List
Ethyl Alcohol 64-17-5 MA 1; NJ 1S; PA 1; CN 2
Isopropanol 67-63-0 MA 1; NJ 1; CN 1
Propylene Glycol 57-55-6 PA 1; CN 1
3.
HAZARDS IDENTIFICATION:
EMERGENCY OVERVIEW
When used according to instructions, the product applicable to this MSDS is safe and presents no
immediate or long-term health hazard. However, abnormal entry routes, such as gross ingestion, may
require immediate medical attention.
Potential Health Effects:
HMIS: Health 1 Flammability 0 Reactivity 0 Personal Protection None
Eye Contact: May cause eye irritation.
Skin Contact: No irritation or reaction expected.
Inhalation: Not applicable.
Ingestion: May cause upset stomach, nausea (Abnormal entry route).
Carcinogenicity: Not listed as a carcinogen by NTP, IARC, OSHA or ACGIH.
4.
FIRST AID MEASURES:
Eye Contact: Do not rub eyes. Flush eyes thoroughly with water for 15 minutes. If condition
worsens or irritation persists, contact physician.
Skin Contact: Not applicable.
Inhalation: Not applicable.
Ingestion: Do not induce vomiting. Contact a physician or Poison Control Center.