Pro-Link ProFormance Series Foam Alcohol Sanitizer TSA1000 User Manual
Material safety data sheet
Material Safety Data Sheet
Page 1 of 3
(Essentially similar to Form OSHA-174 / 29 CFR 1910.1200)
Product name: Pro-Link ProFormance Series Foam Alcohol Sanitizer
Revision Date: 11.19.2010
Supersedes Revision: 11.19.2010
1. IDENTIFICATION OF THE SUBSTANCE / PREPARATION AND OF THE COMPANY / UNDERTAKING
Product name:
PROFORMANCE SERIES FOAM ALCOHOL SANITIZER
Product code:
MSA1000; TSA1000
Use of substance / preparation: Foaming hand sanitizer
Company name:
Pro-Link, Inc.
500 Chapman Street
Canton, MA 02021
Tel: 800-74-LINKS (800-745-4657)
2. HAZARDS INDENTIFICATION
Main hazards:
Highly flammable.
3. COMPOSITION / INFORMATION ON INGREDIENTS
Contains:
ACTIVE INGREDIENT
CAS NUMBER
WEIGHT, %
Ethyl Alcohol
64-17-5
72
INACTIVE
INGREDIENTS
Water
7732-18-5
n-Propanol
71-23-8
Coco-Glucoside
141464-42-8
Glyceryl Oleate
68424-61-3
PEG-7 Glyceryl Cocoate
68201-46-7
PEG-200 Hydrogenated Glyceryl Palmate
67784-88-7
Dihydroxypropyl PEG-5 Linoleammonium Chloride 168677-75-6
Behentrimonium Chloride
17301-53-0
Bis-PEG 12 Dimethicone
102783-01-7
4. FIRST AID MEASURES (SYMPTOMS)
4. FIRST AID MEASURES (SYMPTOMS)
Skin contact:
Not Applicable
Eye contact:
There may be irritation and redness.
Ingestion:
There may be soreness and redness of the mouth and throat.
Inhalation:
Fumes or vapor may cause irritation, nausea or drowsiness.
FIRST AID MEASURES (ACTIONS)
Skin contact:
Not applicable
Eye contact:
Wash immediately with clean water for at least 10 minutes, while lifting eye lids. If any
soreness or irritation persists seek medical advice.
Ingestion:
Wash out mouth with water. Do not induce vomiting. Seek medical attention.
Inhalation:
Remove to fresh air and seek medical advice if symptoms persist.
5. FIRE-FIGHTING MEASURES
Extinguishing media:
Carbon dioxide, alcohol resistant foam, dry chemical powder. Do not use water.
Protection of fire-fighters:
Wear self-contained breathing apparatus.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions:
Refer to section 8 of MSDS for personal protection details.
Environmental precautions:
Do not allow to contaminate watercourses or rivers.
Clean-up procedures:
In the event of spillage mop up bulk and dilute remainder to foul drain with water. Treat
large spillages as industrial waste.
7. HANDLING AND STORAGE