Pro-Link Nutty Green 99022499 - Manual (Page 3)

Material Safety Data Sheet
Product Name: Nutty Green MSDS ID: SK-117D
____________________________________________________________
Page 3 of 5 Issue Date: 8/2/2010 Revision: 3.0000 Print Date: 8/2/2010
Storage Procedures
Protect from freezing or extreme heat.
* * * Section 8 - Exposure Controls / Personal Protection * * *
Exposure Guidelines
A: General Product Information
FDA regulated. For OSHA workplace hazards, investigate and read and understand component MSDS’s before
manufacturing.
B: Component Exposure Limits
No information is available.
Engineering Controls
None necessary.
PERSONAL PROTECTIVE EQUIPMENT
Personal Protective Equipment: Eyes/Face
Avoid eye contact.
Personal Protective Equipment: Skin
None.
Personal Protective Equipment: Respiratory
Not required for product end use.
Personal Protective Equipment: General
Obey reasonable safety precautions and practice good housekeeping.
* * * Section 9 - Physical & Chemical Properties * * *
Appearance: Green paste Odor: perfume fragrance (0.1-1%)
Physical State: liquid (Emulsion) pH: 5.2-5.8
Vapor Pressure: 0.07 mm Hg Vapor Density: Not Established
Boiling Point: >212 °F Melting Point: 32° F
Solubility (H2O): approximately 25% soluble
in water
Specific Gravity: 1.05 g/cc
3
Evaporation Rate: <1 Flash Point: >200 o
F (Estimated)
Percent Volatile: 0% (Federal); LVP-VOC
only (California
* * * Section 10 - Chemical Stability & Reactivity Information * * *
Chemical Stability
Stable under usual application conditions.
Chemical Stability: Conditions to Avoid
None.
Incompatibility
None identified.
Hazardous Decomposition
None identified.
Hazardous Polymerization
Hazardous polymerization will not occur.