Chicago Electric 7-1/4" Circular Saw Worm Gear Drive 90186 - Manual (Page 5)

22. Check for misalignment or binding of moving parts, breakage of parts, and
any other condition that may affect the tool’s operation. If damaged, have
the tool serviced before using. Many accidents are caused by poorly
maintained tools.
23. Use only accessories that are recommended by the manufacturer for your
model. Accessories that may be suitable for one tool may become hazardous
when used on another tool.
SERVICE
24. Tool service must be performed only by qualified repair personnel. Service
or maintenance performed by unqualified personnel could result in a risk of injury.
25. When servicing a tool, use only identical replacement parts. Follow
instructions in the “Inspection, Maintenance, And Cleaning” section of this
manual. Use of unauthorized parts or failure to follow maintenance instructions
may create a risk of electric shock or injury.
SPECIFIC SAFETY RULES
1. Maintain a safe working environment. Keep the work area well lit. Make sure
there is adequate surrounding workspace. Always keep the work area free of
obstructions, grease, oil, trash, and other debris. Do not use the Circular Saw in
areas near flammable chemicals, dusts, and vapors.
2. Maintain labels and nameplates on the Circular Saw. These carry
important information. If unreadable or missing, contact Harbor Freight Tools for
a replacement.
3. To avoid serious personal injury and/or property damage, always
use Saw Blades (part #3) that are rated at 4500 RPM or greater on this par-
ticular Circular Saw.
4. Replace a dull or damaged Saw Blade (part #3) immediately.
5. Always wear a safety impact full face shield, hearing protection, and heavy
duty work gloves when using this product. A safety impact full face shield,
hearing protection, and heavy duty work gloves are available from Harbor Freight
Tools.
6. Keep all guards in place and working properly.
SKU 90186 PAGE 5
WARnInG