Pro-Link Clear View - High Gloss, Low Maintenance Finish D10787 - Manual (Page 3)

None normally required if ventillation is adequate.
Respiratory Protection:
Rubber gloves, if prolonged contact
Skin Protection:
Safety Glasses or Goggles
Eye Protection:
Chemical apron when handling large volumes of material.
Other:
Local exhaust to maintain general good ventillation.
Ventilation Requirements:
Liquid Physical Form:
Opaque Color:
Slight amine Odor:
Approximately 212°F Boiling Point:
About the same as water. Evaporation Rate:
8.5 ± 0.5 pH:
1.020 Specific Gravity:
Emulsifiable Solubility:
NE Freezing Point:
80% % Volatile:
This product is stable at ambient temperature and pressure.
Stability:
NA
Hazardous Decomposition Products:
None
Hazardous Polymerization:
None
Incompatibility:
Page: 3 of 4 11/22/06
Clear View
Section 8 - Exposure Controls Personal Protection
Section 9 - Physical / Chemical Properties
Section 10 - Stability and Reactivity
NE Vapor Pressure: 5.14% V.O.C.